Cleaning Strength: 8 (Extra Heavy-Duty)
TerraGreen® Kick® is a hard water scale remover that is safer than HCl or Phos acid cleaners. Kicks soils like acid to remove built-up hard water scale, rust, soap scum, mold stains, and mildew stains. Worker-friendly with a low odor that leaves no harsh acid fumes. Dilutes 3 ways based on soil load.
Dispenses accurately through Brulin SCS2 dilution control system: SCS2 BLACK SHADOW (3.1) or SCS2 BLACK SHADOW (4.3.1).
Always follow directions and information directly on the product label before use.
To ensure an accurate dilution, use only with the Brulin SCS2 dispenser.
Use the SCS2 dispenser to fill a bucket, equipment, or properly labeled spray bottle with TerraGreen® Kick® solution. Use cold water.
Apply to surfaces to be cleaned. Wait, allowing a few minutes dwell time. Scrub with light-duty (non-scratching) abrasive pad. Rinse all surfaces with water. Rinse pads and equipment with water before storage.
Prolonged contact with metal surfaces may stain or etch the surface. Always ensure adequate rinse after cleaning. Use-dilution labels available from Brulin or local distributor.
Always follow directions and information directly on the product label before use.
Each ½ gal. of TerraGreen® Kick® yields 32 gal (130 qt) of ready-to-use product at 1:64 dilution rate.
Use the appropriate color tip on the proportioner inlet to deliver the desired dilution.
TerraGreen® Kick® meets Green Seal® Standard GS-37. All Green Seal® certified products must demonstrate an effective level of cleaning performance via objective, scientifically validated methods conducted under controlled and reproducible laboratory conditions.
Green Seal’s GS-37 leadership standard means a general-purpose cleaning product is safer for human health and the environment compared to conventional alternatives while providing uncompromising cleaning performance.