Automotive industry-approved lubricant and corrosion inhibitor for fasteners needing to meet required torque test. Most applications work well when the use-dilution is between 1 part Nut Lube 333A (FD) to 1 part water (50%).
Nut Lube 333A (FD) is diluted to achieve the required torque specified in an application. Most applications work well when the use-dilution is between 1 part Nut Lube 333A (FD) to 1 part water (50%) down to 1 to 4 (~ 20%) while some applications require using as heavy as 100%. The more concentrated the use-dilution is for Nut Lube 333A (FD), the lower the torque values will be.
The solution of Nut Lube 333A (FD) is applied at ambient temperature. Pieces to be coated may be sprayed, dipped, or wiped with the Nut Lube 333A (FD) solution. Parts can then be allowed to drain dry, spin dry or forced heated air can be applied.
Contact a Brulin representative for more technical information and application data on Brulin Nut Lubes.
| Typical Dilution | 50% |
| Container Options | 55 Gallon (55) |