Nature-Sol® 100 A

Material Compatibility

Nature-Sol® 100 A is non-corrosive and non-staining to a wide variety of substrates. Some selected categories of materials compatible with Nature-Sol® 100-A include*:

Ferrous Metals

• Carbon Steel
• Stainless Steel

Other Metals & Alloys

• Aluminum
• Brass
• Cadmium Plating
• Chrome Plating
• Copper (Alloys & Plating)
• Hastelloy
• Inconel
• Magnesium & Magnesium Alloys
• Monel
• Ni-Cad Plating
• Nickel, Nickel Alloys & Plating
• Tin
• Titanium & Titanium Alloys
• Zinc & Galvanized

Plastic & Composites

• High Density Polyethylene (HDPE)
• Polypropylene (PP)

Other Surfaces

• Concrete
• Glass

* = Material compatibility should always be confirmed via testing with specific contaminants under specific cleaning conditions.

Soil Removal

Nature-Sol® 100 A removes a wide range of organic and inorganic soils. Some categories of soils that can be removed by Nature-Sol® 100-A include*:

• Adhesives
• Caulks
• Dirt (Particulate)
• Fat
• Fluorinated Greases
• Grease
• Oil (General, Cutting, Drawing Compounds, Fingerprints, Forming, Honey, Hydrocarbon, Lubricants, Self Emulsifying, Sulfur/Chlorinated)
• Tar & Pitch
• Uncured Urethane
• Waxes

* = Cleaning performance should be confirmed via testing with specific contaminants under specific cleaning conditions.

Usage Directions

DO NOT MIX WITH OTHER CHEMICALS.

Nature-Sol® 100 A is a ready-to-use product, used neat/undiluted in most applications. Nature-Sol® 100 A should be tested on painted surfaces prior to cleaning as the product may attack certain lower grades of paint.

1. Apply by brush, wipe-on, or spray & wipe or, mop & bucket onto the oily or soiled surface. Do not use in a steam cleaner or high pressure sprayer without adequate ventilation.
2. Allow a few minutes dwell time.
3. Agitate if heavily soiled or rub it into particularly thick layers of the soil.
4. Rinse with water.

Nature-Sol® 100 A may be used in Immersion Tanks; and used neat/undiluted in most applications; Nature-Sol® 100 A may be diluted with water and remain effective on some soils.

Quick-breaking emulsion may be skimmed off water surface to reduce effluent COD/BOD.

Nature-Sol® 100 A may also be proportioned (1 pint per hour) into drains or grease traps for the removal of oils and greases from those systems.