Nature-Sol® 50

Usage Directions

Always follow directions and information directly on the product label before use.

1. Apply by brush, wipe-on, or spraying Nature-Sol® 50 onto the oily or soiled surface.
2. Allow a few minutes dwell time, or rub it into particularly thick layers of the soil.
3. Rinse with water.

Quick-breaking emulsion may be skimmed off water surface to reduce effluent COD/BOD. Nature-Sol® 50 may also be proportioned (1 pint per hour) into drains or grease traps for the removal of oils and greases from those systems.

Material Compatibility

Nature-Sol® 50 is non-corrosive and non-staining to a wide variety of alloys. Some selected categories of materials compatible with Nature-Sol® 50 include*:

Ferrous Metals

• Carbon Steel
• Stainless Steel
• Steel

Non-Ferrous Metals & Alloys

• Aluminum
• Brass
• Cadmium Plating
• Chrome Plating
• Copper (Alloys & Plating)
• Magnesium & Magnesium Alloys
• Nickel
• Nickel Alloys & Plating
• Titanium & Titanium Alloys
• Zinc & Galvanized

Plastics & Composites

• High Density Polyethylene (HDPE)

Other Substrates

• Concrete
• Glass

* = Material compatibility should always be confirmed via testing with specific contaminants under specific cleaning conditions.

Soil Removal

Nature-Sol® 50 removes a wide range of organic and inorganic soils. Some categories of soils that can be removed with Nature-Sol® 50 include*:

• Adhesives
• Caulks
• Dirt (Particulate)
• Fat
• Fluorinated Greases
• Grease
• Inks
• Oil (General Cutting, Drawing Compounds, Fingerprints, Forming, Honey, Hydrocarbon, Lubricants, Self-Emulsifying, Silicone/Grease, Sulfur/Chlorinated, Water-soluble)
• Rubber & Tire Marks
• Smoke Residue
• Tar & Pitch
• Uncured Urethanes
• Waxes
• Mastic (Adhesive)

* = Cleaning performance should be confirmed via testing with specific contaminants under specific cleaning conditions.