AquaVantage® 1400 GD

AquaVantage® 1400 GD Cleaning Ranges

Always follow directions and information directly on the product label before use.

• System: Immersion & Ultrasonic Tanks
• Dilution Rate: 5-30%, typically used at 10%. Minimum recommended concentration for cleaning aluminum is 5.0%.
• Temperature: 130-180ºF (54-82ºC), typically used at 140-150ºF (60-66ºC).
• Cleaning Duration: 1-30 minutes, typical parts are cleaned in 1-5 minutes.

AquaVantage® 1400 GD Usage Directions

Always follow directions and information directly on the product label before use.

Process cleaning systems should be cleaned prior to the introduction of AquaVantage® 1400 GD. Contact a Brulin parts cleaning representative for specific use-case guidelines about the rinse process, drying process, and for information and cleaning recommendations.

1. Add AquaVantage® 1400 GD to solution tank filled with hot or cold water using the dilution rate for your system.
2. Mix solution thoroughly.
3. Heat solution to specified temperature for your cleaning system.
4. Immerse parts in tank and soak until soil is removed.
5. Remove parts.
6. Rinse with water. Recommended conductivity of final rinse water:
   • Ultra-Clean Applications: ≤ 50 microsiemens
   • Precision Cleaning: ≤ 500 microsiemens
   • Gross Cleaning: > 500 microsiemens
7. Dry parts.
   • To avoid spotting, it is best if the parts remain wet between processing stages.
   • Extended corrosion protection can be achieved with Brulin corrosion inhibitors.
     • RP 737 | Water-Based Corrosion Inhibitor
     • RP 800 | Ready-To-Use Oil-Based Corrosion Inhibitor
     • RP 802 | Dilutable Oil-Based Corrosion Inhibitor
     • RP 835 | Concentrated Nitrate-Based Corrosion Inhibitor

AquaVantage® 1400 GD Storage & Disposal Recommendations

Always follow directions and information directly on the product label before use.

Storage

To prevent incorrect or unsafe storage of AquaVantage® 1400 GD, store away from incompatible materials.

Disposal

When disposing of AquaVantage® 1400 GD, dispose of waste and residues in accordance with local authority requirements. Please recycle container.

AquaVantage® 1400 GD Safety Precautions

Always follow directions and information directly on the product label before use.

Keep out of reach of children. AquaVantage® 1400 GD is for industrial or commercial use only. To prevent the misuse of AquaVantage® 1400 GD, use only in accordance with the following safety precautions.

• Wear safety glasses with side shields (or goggles).
• Wear protective gloves.
• Wash hands thoroughly after handling.