Close Mobile Menu

SolVantage® Flush

Vapor Degreasing Solvent (Drop-In Replacement For 3M Novec® 73DE)

Brulin SolVantage Flush vapor degreasing solvent in 55 Gallon and 5 Gallon Containers
SKU: 304044

Drop-In Replacement For 3M Novec® 73DE

SolVantage® Flush is Brulin’s newest 1,2 trans blend vapor degreasing solvent using no HFCs. This solvent blend is perfectly suited for vapor degreasing in modern equipment and general cleaning. Its solvency for hydrocarbon soils is superior to most similar high-trans fluorinated solvent blends.

With a high KB value of 94, it can reliably replace other cleaning solvents such as n-propyl bromide (nPB), trichloroethylene (TCE), 3M Novec®, and Chemours Vertrel®. It can also be used as a carrier fluid for deposition of materials such as silicone and other lubricants.

Purchasing Information & Quotes
  • Benefits
  • Environmental Properties
  • Safety Data Sheets

SolVantage® Flush Product Benefits

  • High Solvency
  • No Surface Residues
  • Low Surface Tension
  • Low Viscosity
  • Non-Flammable, No Flash Point
  • No Drop Test Required

SolVantage® Flush Material Compatibility

Compatible Materials

SolVantage® Flush is non-corrosive and non-staining to a wide variety of substrates. Some selected categories of materials compatible with SolVantage® Flush include*:

  • Most polymers and elastomers typically encountered during cleaning and vapor degreasing of precision parts, electronics, etc.
  • Copper, Stainless Steel, Aluminum, Titanium and other metals commonly used in precision parts manufacturing
  • Polyethylene
  • Polyvinylchloride (PVC, CPVC)
  • Polyester (PET, BET)
  • Polyimide (PI, PEI, PAI)
  • Polyetherketone (PEK)
  • Polyaryletherketone (PEEK)
  • Polyarylsulfone (PAS)
  • Polyphenylene Sulfide (PPS)
  • Polypropylene
  • Acetal
  • Epoxy
  • PTFE, Teflon
  • Polysulfone (PSO)
  • Phenolic
  • Ionomer
  • EPDM

Incompatible Materials

Materials incompatible with SolVantage® Flush include*:

  • Polystyrene
  • Polyphenylene Oxide (PPO)
  • Polycarbonate
  • ABS
  • Epichlorohydrin
  • Silicone
  • Natural Rubber
  • Acrylic

* = Material compatibility should always be confirmed via testing with specific contaminants under specific cleaning conditions.

SolVantage® Flush Soil Removal

SolVantage® Flush removes a wide range of organic soils. Some categories of soils that can be removed with SolVantage® Flush include*:

  • Buffing compounds
  • Corrosion Inhibiting Compounds (CICs)
  • Greases
  • Hydraulic Fluids
  • Oils (Drawing, Silicone)
  • Particulate
  • Metalworking Fluids (Water Soluble, Straight Oil & Synthetic)
  • Krytox
  • FPI Fluid

* = Material compatibility should always be confirmed via testing with specific contaminants under specific cleaning conditions.

SolVantage® Flush Test Compliance

  • ARP 1755: Cat 12
  • ASTM F519: Hydrogen Embrittlement
  • ASTM F945-12: Titanium Stress
  • ASTM F2111-01A: IGA/EGP
  • ASTM F483: Total Immersion Corrosion
  • ASTM F1110: Sandwich Corrosion
  • ASTM F502: Painted Aircraft Surfaces

Streamline Your Parts Cleaning With Brulin Today!
Get Started

Explore Parts Cleaning Products

SolVantage® Flush Product Specifications

Physical Form Liquid
Color Colorless
Viscosity 0.41 cPs
Typical Dilution RTU
Vapor Pressure 292 torr
Heat Capacity 0.297cal/g
KB Value 94
Flash Point None (per ASTM D93 & ASTM D56)
Vapor Flammability Limit in AIr, VOL % LEL - 5.7% / UEL - 19%
Surface Tension 16.4 mN/m
Heat of Vaporization 163 kJ/kg*K
Container Options 55 Gal (208L), 5 Gal (19L)